⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Shawano County › Birnamwood (54414)

Birnamwood, WI (54414): well depth, water level & drilling cost

✓ 772 WI DNR records · Shawano County

66 ftmedian well depth
46 ft–103 fttypical depth range
20 ftmedian static water level
15 gpmmedian yield (459 tests)

Pull every recorded well near a Birnamwood (54414) address — $49

How deep are wells in and around Birnamwood (54414), Wisconsin?

The median drilled well depth in and around Birnamwood (54414) is 66 ft, based on 468 wells with recorded depths in the state WI DNR database. Half fall between 46 ft and 103 ft; 90% are shallower than 185 ft.

How much does it cost to drill a well in and around Birnamwood (54414)?

Applying published per-foot rates to the local median depth of 66 ft: drilling and casing alone typically runs $1,650–$4,290; a complete system including pump, pressure tank, and hookup typically runs $3,960–$6,600. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Birnamwood (54414)?

The median static water level is 20 ft below ground surface (middle half of wells: 13 ft–30 ft), from 459 measurements.

Drilled depth distribution

0–50 ft 127 50–100 ft 216 100–150 ft 62 150–200 ft 19 200–300 ft 33 300–400 ft 10 400–600 ft 1 600+ ft 0
Looking at a specific property in Birnamwood (54414)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Birnamwood (54414)

Free. Goes to licensed drillers working Shawano County.

Part of Shawano County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.