⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Shawano County › Bowler (54416)

Bowler, WI (54416): well depth, water level & drilling cost

✓ 449 WI DNR records · Shawano County

90 ftmedian well depth
55 ft–197 fttypical depth range
21 ftmedian static water level
15 gpmmedian yield (293 tests)

Pull every recorded well near a Bowler (54416) address — $49

How deep are wells in and around Bowler (54416), Wisconsin?

The median drilled well depth in and around Bowler (54416) is 90 ft, based on 299 wells with recorded depths in the state WI DNR database. Half fall between 55 ft and 197 ft; 90% are shallower than 285 ft.

How much does it cost to drill a well in and around Bowler (54416)?

Applying published per-foot rates to the local median depth of 90 ft: drilling and casing alone typically runs $2,250–$5,850; a complete system including pump, pressure tank, and hookup typically runs $5,400–$9,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Bowler (54416)?

The median static water level is 21 ft below ground surface (middle half of wells: 14 ft–28 ft), from 294 measurements.

Drilled depth distribution

0–50 ft 63 50–100 ft 90 100–150 ft 43 150–200 ft 29 200–300 ft 52 300–400 ft 20 400–600 ft 1 600+ ft 1
Looking at a specific property in Bowler (54416)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Bowler (54416)

Free. Goes to licensed drillers working Shawano County.

Part of Shawano County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.