⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Langlade County › Bryant (54418)

Bryant, WI (54418): well depth, water level & drilling cost

✓ 703 WI DNR records · Langlade County

100 ftmedian well depth
71 ft–145 fttypical depth range
60 ftmedian static water level
20 gpmmedian yield (340 tests)

Pull every recorded well near a Bryant (54418) address — $49

How deep are wells in and around Bryant (54418), Wisconsin?

The median drilled well depth in and around Bryant (54418) is 100 ft, based on 387 wells with recorded depths in the state WI DNR database. Half fall between 71 ft and 145 ft; 90% are shallower than 198 ft.

How much does it cost to drill a well in and around Bryant (54418)?

Applying published per-foot rates to the local median depth of 100 ft: drilling and casing alone typically runs $2,500–$6,500; a complete system including pump, pressure tank, and hookup typically runs $6,000–$10,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Bryant (54418)?

The median static water level is 60 ft below ground surface (middle half of wells: 35 ft–106 ft), from 365 measurements.

Drilled depth distribution

0–50 ft 27 50–100 ft 162 100–150 ft 107 150–200 ft 52 200–300 ft 31 300–400 ft 7 400–600 ft 1 600+ ft 0
Looking at a specific property in Bryant (54418)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Bryant (54418)

Free. Goes to licensed drillers working Langlade County.

Part of Langlade County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.