⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Langlade County › Deerbrook (54424)

Deerbrook, WI (54424): well depth, water level & drilling cost

✓ 889 WI DNR records · Langlade County

70 ftmedian well depth
43 ft–125 fttypical depth range
19 ftmedian static water level
18 gpmmedian yield (519 tests)

Pull every recorded well near a Deerbrook (54424) address — $49

How deep are wells in and around Deerbrook (54424), Wisconsin?

The median drilled well depth in and around Deerbrook (54424) is 70 ft, based on 551 wells with recorded depths in the state WI DNR database. Half fall between 43 ft and 125 ft; 90% are shallower than 185 ft.

How much does it cost to drill a well in and around Deerbrook (54424)?

Applying published per-foot rates to the local median depth of 70 ft: drilling and casing alone typically runs $1,750–$4,550; a complete system including pump, pressure tank, and hookup typically runs $4,200–$7,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Deerbrook (54424)?

The median static water level is 19 ft below ground surface (middle half of wells: 10 ft–32 ft), from 539 measurements.

Drilled depth distribution

0–50 ft 179 50–100 ft 155 100–150 ft 129 150–200 ft 41 200–300 ft 34 300–400 ft 13 400–600 ft 0 600+ ft 0
Looking at a specific property in Deerbrook (54424)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Deerbrook (54424)

Free. Goes to licensed drillers working Langlade County.

Part of Langlade County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.