⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Langlade County › Elcho (54428)

Elcho, WI (54428): well depth, water level & drilling cost

✓ 701 WI DNR records · Langlade County

53 ftmedian well depth
40 ft–81 fttypical depth range
19 ftmedian static water level
15 gpmmedian yield (496 tests)

Pull every recorded well near a Elcho (54428) address — $49

How deep are wells in and around Elcho (54428), Wisconsin?

The median drilled well depth in and around Elcho (54428) is 53 ft, based on 518 wells with recorded depths in the state WI DNR database. Half fall between 40 ft and 81 ft; 90% are shallower than 157 ft.

How much does it cost to drill a well in and around Elcho (54428)?

Applying published per-foot rates to the local median depth of 53 ft: drilling and casing alone typically runs $1,325–$3,445; a complete system including pump, pressure tank, and hookup typically runs $3,180–$5,300. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Elcho (54428)?

The median static water level is 19 ft below ground surface (middle half of wells: 13 ft–28 ft), from 519 measurements.

Drilled depth distribution

0–50 ft 233 50–100 ft 183 100–150 ft 46 150–200 ft 20 200–300 ft 30 300–400 ft 5 400–600 ft 1 600+ ft 0
Looking at a specific property in Elcho (54428)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Elcho (54428)

Free. Goes to licensed drillers working Langlade County.

Part of Langlade County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.