⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Langlade County › Elton (54430)

Elton, WI (54430): well depth, water level & drilling cost

✓ 304 WI DNR records · Langlade County

66 ftmedian well depth
53 ft–91 fttypical depth range
36 ftmedian static water level
20 gpmmedian yield (178 tests)

Pull every recorded well near a Elton (54430) address — $49

How deep are wells in and around Elton (54430), Wisconsin?

The median drilled well depth in and around Elton (54430) is 66 ft, based on 180 wells with recorded depths in the state WI DNR database. Half fall between 53 ft and 91 ft; 90% are shallower than 122 ft.

How much does it cost to drill a well in and around Elton (54430)?

Applying published per-foot rates to the local median depth of 66 ft: drilling and casing alone typically runs $1,650–$4,290; a complete system including pump, pressure tank, and hookup typically runs $3,960–$6,600. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Elton (54430)?

The median static water level is 36 ft below ground surface (middle half of wells: 23 ft–56 ft), from 179 measurements.

Drilled depth distribution

0–50 ft 36 50–100 ft 109 100–150 ft 26 150–200 ft 4 200–300 ft 4 300–400 ft 1 400–600 ft 0 600+ ft 0
Looking at a specific property in Elton (54430)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Elton (54430)

Free. Goes to licensed drillers working Langlade County.

Part of Langlade County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.