⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Langlade County › Phlox (54464)

Phlox, WI (54464): well depth, water level & drilling cost

✓ 377 WI DNR records · Langlade County

61 ftmedian well depth
46 ft–82 fttypical depth range
30 ftmedian static water level
18 gpmmedian yield (233 tests)

Pull every recorded well near a Phlox (54464) address — $49

How deep are wells in and around Phlox (54464), Wisconsin?

The median drilled well depth in and around Phlox (54464) is 61 ft, based on 236 wells with recorded depths in the state WI DNR database. Half fall between 46 ft and 82 ft; 90% are shallower than 127 ft.

How much does it cost to drill a well in and around Phlox (54464)?

Applying published per-foot rates to the local median depth of 61 ft: drilling and casing alone typically runs $1,525–$3,965; a complete system including pump, pressure tank, and hookup typically runs $3,660–$6,100. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Phlox (54464)?

The median static water level is 30 ft below ground surface (middle half of wells: 16 ft–42 ft), from 234 measurements.

Drilled depth distribution

0–50 ft 67 50–100 ft 130 100–150 ft 32 150–200 ft 1 200–300 ft 6 300–400 ft 0 400–600 ft 0 600+ ft 0
Looking at a specific property in Phlox (54464)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Phlox (54464)

Free. Goes to licensed drillers working Langlade County.

Part of Langlade County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.