⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Langlade County › Pickerel (54465)

Pickerel, WI (54465): well depth, water level & drilling cost

✓ 1,105 WI DNR records · Langlade County

58 ftmedian well depth
41 ft–77 fttypical depth range
22 ftmedian static water level
18 gpmmedian yield (821 tests)

Pull every recorded well near a Pickerel (54465) address — $49

How deep are wells in and around Pickerel (54465), Wisconsin?

The median drilled well depth in and around Pickerel (54465) is 58 ft, based on 859 wells with recorded depths in the state WI DNR database. Half fall between 41 ft and 77 ft; 90% are shallower than 114 ft.

How much does it cost to drill a well in and around Pickerel (54465)?

Applying published per-foot rates to the local median depth of 58 ft: drilling and casing alone typically runs $1,450–$3,770; a complete system including pump, pressure tank, and hookup typically runs $3,480–$5,800. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Pickerel (54465)?

The median static water level is 22 ft below ground surface (middle half of wells: 11 ft–35 ft), from 832 measurements.

Drilled depth distribution

0–50 ft 337 50–100 ft 408 100–150 ft 75 150–200 ft 12 200–300 ft 22 300–400 ft 5 400–600 ft 0 600+ ft 0
Looking at a specific property in Pickerel (54465)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Pickerel (54465)

Free. Goes to licensed drillers working Langlade County.

Part of Langlade County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.