Wisconsin Well Data › Langlade County › Summit Lake (54485)
Summit Lake, WI (54485): well depth, water level & drilling cost
✓ 927 WI DNR records · Langlade County
Pull every recorded well near a Summit Lake (54485) address — $49
How deep are wells in and around Summit Lake (54485), Wisconsin?
The median drilled well depth in and around Summit Lake (54485) is 90 ft, based on 553 wells with recorded depths in the state WI DNR database. Half fall between 54 ft and 129 ft; 90% are shallower than 173 ft.
How much does it cost to drill a well in and around Summit Lake (54485)?
Applying published per-foot rates to the local median depth of 90 ft: drilling and casing alone typically runs $2,250–$5,850; a complete system including pump, pressure tank, and hookup typically runs $5,400–$9,000. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around Summit Lake (54485)?
The median static water level is 29 ft below ground surface (middle half of wells: 19 ft–42 ft), from 554 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Langlade County.
Part of Langlade County well records.
Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.