⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Price County › Catawba (54515)

Catawba, WI (54515): well depth, water level & drilling cost

✓ 399 WI DNR records · Price County

67 ftmedian well depth
46 ft–97 fttypical depth range
19 ftmedian static water level
9 gpmmedian yield (340 tests)

Pull every recorded well near a Catawba (54515) address — $49

How deep are wells in and around Catawba (54515), Wisconsin?

The median drilled well depth in and around Catawba (54515) is 67 ft, based on 366 wells with recorded depths in the state WI DNR database. Half fall between 46 ft and 97 ft; 90% are shallower than 145 ft.

How much does it cost to drill a well in and around Catawba (54515)?

Applying published per-foot rates to the local median depth of 67 ft: drilling and casing alone typically runs $1,675–$4,355; a complete system including pump, pressure tank, and hookup typically runs $4,020–$6,700. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Catawba (54515)?

The median static water level is 19 ft below ground surface (middle half of wells: 13 ft–30 ft), from 341 measurements.

Drilled depth distribution

0–50 ft 106 50–100 ft 174 100–150 ft 56 150–200 ft 19 200–300 ft 9 300–400 ft 0 400–600 ft 1 600+ ft 1
Looking at a specific property in Catawba (54515)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Catawba (54515)

Free. Goes to licensed drillers working Price County.

Part of Price County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.