⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Price County

Price County, Wisconsin: well depth, water level & drilling cost

✓ 6,338 WI DNR records · verified 2026-06-30

71 ftmedian well depth
48 ft–105 fttypical depth range
18 ftmedian static water level
10 gpmmedian yield (5,296 tests)

How deep are wells in Price County, Wisconsin?

The median drilled well depth in Price County is 71 ft, based on 5,065 wells with recorded depths in the state WI DNR database. Half of all wells fall between 48 ft and 105 ft; 90% are shallower than 160 ft. Wells drilled since 2016 have a median depth of 73 ft.

How much does it cost to drill a well in Price County?

Applying published per-foot rates to the local median depth of 73 ft: drilling and casing alone typically runs $1,825–$4,745; a complete system including pump, pressure tank, and hookup typically runs $4,380–$7,300. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in Price County?

The median static water level is 18 ft below ground surface (middle half of wells: 11 ft–29 ft), from 5,368 measurements.

How much water do wells in Price County produce?

The median tested yield is 10 gpm (middle half: 6 gpm–12 gpm), from 5,296 pump tests. A typical household needs 5–10 gpm.

Pull every recorded well near a Price County address — $19

Drilled depth distribution

0–50 ft 1,335 50–100 ft 2,226 100–150 ft 922 150–200 ft 326 200–300 ft 215 300–400 ft 36 400–600 ft 4 600+ ft 1

Who drills wells in Price County?

Companies by number of wells completed in this county since 2016, per filed well construction reports (Wisconsin DNR).

DrillerWells since 2016
KOMAREK, RONALD A SR334
KOMAREK, THEODORE88
RONALD A KOMAREK SR81
KARNOSH, DONALD F58
KOMAREK SR, RONALD A33
BRUNNER WELL DRILLING LLC32
RICHARDSON WD/ERTL ENTERPRISES INC23
DONALD F KARNOSH23

Get quotes from local drillers

Looking at a specific property in Price County?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $19

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft). Cost estimate applies published per-foot ranges (checked 2026-06-11) to the local median depth — full methodology & sources.