⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Price County › Park Falls (54552)

Park Falls, WI (54552): well depth, water level & drilling cost

✓ 902 WI DNR records · Price County

65 ftmedian well depth
46 ft–102 fttypical depth range
18 ftmedian static water level
9 gpmmedian yield (634 tests)

Pull every recorded well near a Park Falls (54552) address — $49

How deep are wells in and around Park Falls (54552), Wisconsin?

The median drilled well depth in and around Park Falls (54552) is 65 ft, based on 636 wells with recorded depths in the state WI DNR database. Half fall between 46 ft and 102 ft; 90% are shallower than 174 ft.

How much does it cost to drill a well in and around Park Falls (54552)?

Applying published per-foot rates to the local median depth of 65 ft: drilling and casing alone typically runs $1,625–$4,225; a complete system including pump, pressure tank, and hookup typically runs $3,900–$6,500. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Park Falls (54552)?

The median static water level is 18 ft below ground surface (middle half of wells: 10 ft–25 ft), from 645 measurements.

Drilled depth distribution

0–50 ft 190 50–100 ft 273 100–150 ft 83 150–200 ft 40 200–300 ft 40 300–400 ft 8 400–600 ft 2 600+ ft 0
Looking at a specific property in Park Falls (54552)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Park Falls (54552)

Free. Goes to licensed drillers working Price County.

Part of Price County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.