⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Price County › Phillips (54555)

Phillips, WI (54555): well depth, water level & drilling cost

✓ 1,734 WI DNR records · Price County

60 ftmedian well depth
40 ft–88 fttypical depth range
17 ftmedian static water level
10 gpmmedian yield (1,558 tests)

Pull every recorded well near a Phillips (54555) address — $49

How deep are wells in and around Phillips (54555), Wisconsin?

The median drilled well depth in and around Phillips (54555) is 60 ft, based on 1,269 wells with recorded depths in the state WI DNR database. Half fall between 40 ft and 88 ft; 90% are shallower than 140 ft.

How much does it cost to drill a well in and around Phillips (54555)?

Applying published per-foot rates to the local median depth of 57 ft: drilling and casing alone typically runs $1,425–$3,705; a complete system including pump, pressure tank, and hookup typically runs $3,420–$5,700. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Phillips (54555)?

The median static water level is 17 ft below ground surface (middle half of wells: 9 ft–26 ft), from 1,576 measurements.

Drilled depth distribution

0–50 ft 478 50–100 ft 525 100–150 ft 152 150–200 ft 55 200–300 ft 46 300–400 ft 13 400–600 ft 0 600+ ft 0
Looking at a specific property in Phillips (54555)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Phillips (54555)

Free. Goes to licensed drillers working Price County.

Part of Price County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.