Wisconsin Well Data › La Crosse County › La Crosse (54603)
La Crosse, WI (54603): well depth, water level & drilling cost
✓ 1,361 WI DNR records · La Crosse County
Pull every recorded well near a La Crosse (54603) address — $49
How deep are wells in and around La Crosse (54603), Wisconsin?
The median drilled well depth in and around La Crosse (54603) is 66 ft, based on 1,168 wells with recorded depths in the state WI DNR database. Half fall between 63 ft and 68 ft; 90% are shallower than 87 ft.
How much does it cost to drill a well in and around La Crosse (54603)?
Applying published per-foot rates to the local median depth of 66 ft: drilling and casing alone typically runs $1,650–$4,290; a complete system including pump, pressure tank, and hookup typically runs $3,960–$6,600. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around La Crosse (54603)?
The median static water level is 28 ft below ground surface (middle half of wells: 20 ft–33 ft), from 1,197 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working La Crosse County.
Part of La Crosse County well records.
Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.