⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › La Crosse County

La Crosse County, Wisconsin: well depth, water level & drilling cost

✓ 8,846 WI DNR records · verified 2026-11-16

108 ftmedian well depth
68 ft–142 fttypical depth range
50 ftmedian static water level
12 gpmmedian yield (5,989 tests)

Pull every recorded well near a La Crosse County address — $49

How deep are wells in La Crosse County, Wisconsin?

The median drilled well depth in La Crosse County is 108 ft, based on 6,010 wells with recorded depths in the state WI DNR database. Half of all wells fall between 68 ft and 142 ft; 90% are shallower than 205 ft. Wells drilled since 2016 have a median depth of 108 ft.

How much does it cost to drill a well in La Crosse County?

Applying published per-foot rates to the local median depth of 108 ft: drilling and casing alone typically runs $2,700–$7,020; a complete system including pump, pressure tank, and hookup typically runs $6,480–$10,800. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in La Crosse County?

The median static water level is 50 ft below ground surface (middle half of wells: 28 ft–77 ft), from 6,023 measurements.

How much water do wells in La Crosse County produce?

The median tested yield is 12 gpm (middle half: 10 gpm–15 gpm), from 5,989 pump tests. A typical household needs 5–10 gpm.

Drilled depth distribution

0–50 ft 128 50–100 ft 2,299 100–150 ft 2,222 150–200 ft 682 200–300 ft 348 300–400 ft 89 400–600 ft 185 600+ ft 57

Who drills wells in La Crosse County?

Companies by number of wells completed in this county since 2016, per filed well construction reports (Wisconsin DNR).

DrillerWells since 2016
LYSAKER, TIMOTHY M166
WELL PROS PUMP & WELL DRILLING SERVICES LLC111
HOLLER, WAYNE105
TIMOTHY M LYSAKER99
SCHAITEL, JAKE J99
HEEG WELL AND PUMP LLC77
SAM'S WELL DRILLING INC73
LYSAKER, DAVID LLOYD73

See every driller with wells on record in La Crosse County, ranked →

Get quotes from local drillers

Looking at a specific property in La Crosse County?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers active in La Crosse County

Free. Goes to licensed drillers working La Crosse County.

Well records by ZIP code in La Crosse County

Median depth, water level, and yield for each ZIP code with recorded wells.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft). Cost estimate applies published per-foot ranges (checked 2026-06-11) to the local median depth — full methodology & sources.