Wisconsin Well Data › La Crosse County › Coon Valley (54623)
Coon Valley, WI (54623): well depth, water level & drilling cost
✓ 326 WI DNR records · La Crosse County
Pull every recorded well near a Coon Valley (54623) address — $49
How deep are wells in and around Coon Valley (54623), Wisconsin?
The median drilled well depth in and around Coon Valley (54623) is 220 ft, based on 248 wells with recorded depths in the state WI DNR database. Half fall between 109 ft and 473 ft; 90% are shallower than 562 ft.
How much does it cost to drill a well in and around Coon Valley (54623)?
Applying published per-foot rates to the local median depth of 220 ft: drilling and casing alone typically runs $5,500–$14,300; a complete system including pump, pressure tank, and hookup typically runs $13,200–$22,000. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around Coon Valley (54623)?
The median static water level is 160 ft below ground surface (middle half of wells: 57 ft–348 ft), from 227 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working La Crosse County.
Part of La Crosse County well records.
Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.