⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › La Crosse County › Holmen (54636)

Holmen, WI (54636): well depth, water level & drilling cost

✓ 2,411 WI DNR records · La Crosse County

110 ftmedian well depth
105 ft–129 fttypical depth range
65 ftmedian static water level
12 gpmmedian yield (1,842 tests)

Pull every recorded well near a Holmen (54636) address — $49

How deep are wells in and around Holmen (54636), Wisconsin?

The median drilled well depth in and around Holmen (54636) is 110 ft, based on 1,855 wells with recorded depths in the state WI DNR database. Half fall between 105 ft and 129 ft; 90% are shallower than 174 ft.

How much does it cost to drill a well in and around Holmen (54636)?

Applying published per-foot rates to the local median depth of 118 ft: drilling and casing alone typically runs $2,950–$7,670; a complete system including pump, pressure tank, and hookup typically runs $7,080–$11,800. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Holmen (54636)?

The median static water level is 65 ft below ground surface (middle half of wells: 36 ft–77 ft), from 1,850 measurements.

Drilled depth distribution

0–50 ft 10 50–100 ft 366 100–150 ft 1,194 150–200 ft 162 200–300 ft 98 300–400 ft 19 400–600 ft 5 600+ ft 1
Looking at a specific property in Holmen (54636)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Holmen (54636)

Free. Goes to licensed drillers working La Crosse County.

Part of La Crosse County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.