⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Shawano County › Leopolis (54948)

Leopolis, WI (54948): well depth, water level & drilling cost

✓ 216 WI DNR records · Shawano County

149 ftmedian well depth
83 ft–245 fttypical depth range
31 ftmedian static water level
12 gpmmedian yield (150 tests)

Pull every recorded well near a Leopolis (54948) address — $49

How deep are wells in and around Leopolis (54948), Wisconsin?

The median drilled well depth in and around Leopolis (54948) is 149 ft, based on 152 wells with recorded depths in the state WI DNR database. Half fall between 83 ft and 245 ft; 90% are shallower than 303 ft.

How much does it cost to drill a well in and around Leopolis (54948)?

Applying published per-foot rates to the local median depth of 149 ft: drilling and casing alone typically runs $3,725–$9,685; a complete system including pump, pressure tank, and hookup typically runs $8,940–$14,900. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Leopolis (54948)?

The median static water level is 31 ft below ground surface (middle half of wells: 17 ft–49 ft), from 151 measurements.

Drilled depth distribution

0–50 ft 10 50–100 ft 40 100–150 ft 26 150–200 ft 23 200–300 ft 35 300–400 ft 15 400–600 ft 3 600+ ft 0
Looking at a specific property in Leopolis (54948)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Leopolis (54948)

Free. Goes to licensed drillers working Shawano County.

Part of Shawano County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.