⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Shawano County › Tilleda (54978)

Tilleda, WI (54978): well depth, water level & drilling cost

✓ 228 WI DNR records · Shawano County

244 ftmedian well depth
145 ft–285 fttypical depth range
20 ftmedian static water level
9 gpmmedian yield (176 tests)

Pull every recorded well near a Tilleda (54978) address — $49

How deep are wells in and around Tilleda (54978), Wisconsin?

The median drilled well depth in and around Tilleda (54978) is 244 ft, based on 177 wells with recorded depths in the state WI DNR database. Half fall between 145 ft and 285 ft; 90% are shallower than 305 ft.

How much does it cost to drill a well in and around Tilleda (54978)?

Applying published per-foot rates to the local median depth of 244 ft: drilling and casing alone typically runs $6,100–$15,860; a complete system including pump, pressure tank, and hookup typically runs $14,640–$24,400. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Tilleda (54978)?

The median static water level is 20 ft below ground surface (middle half of wells: 13 ft–30 ft), from 179 measurements.

Drilled depth distribution

0–50 ft 9 50–100 ft 21 100–150 ft 16 150–200 ft 16 200–300 ft 85 300–400 ft 29 400–600 ft 1 600+ ft 0
Looking at a specific property in Tilleda (54978)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Tilleda (54978)

Free. Goes to licensed drillers working Shawano County.

Part of Shawano County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.